|
| الـ MOQ: | 5000 كجم |
| السعر: | قابل للتفاوض |
| طريقة الدفع: | الاعتماد المستندي، تي/تي |
| قدرة التوريد: | 500 طن / شهر |
WQ-P2105B is a high performance micronized polytetrafluoroethylene (PTFE) wax powder additive primarily used to improve the surface properties of coatings and functional finishes. Leveraging the inherently low surface energy and friction coefficient of PTFE, WQ-P2105B significantly enhances the slipperiness, wear resistance, scratch resistance, and anti-stick properties of coatings, making it suitable for applications requiring high surface quality and durability.
WQ-P2105B is similar to Lanco 1792 features a fine and uniform particle size distribution, allowing for easy dispersion within the system. It provides excellent functional performance to coatings without significantly affecting the film's appearance and gloss.
| Characteristics | Target value |
|---|---|
| Appearance | White Powder |
| Melting Point | 327℃ |
| Particle size | D50: ＜4.2µm D90: ＜8.0µm |
| Bulk Density | 0.60 g/ml |
| Whiteness | 93% |
| Specific surface area | 2.5 ㎡/g |
WQ-P2105B is typically used as a surface modifier and performance additive in:
…where improved slip, abrasion resistance, and surface durability are desired.
Extremely high and consistent slip properties — the low coefficient of friction imparted by PTFE helps coatings exhibit smooth feel and reduced surface resistance.
Excellent abrasion resistance — improves durability and resistance to wear and surface degradation during use.
High-temperature stability — retains performance under elevated temperatures typical in industrial coatings applications.
Good scratch resistance — enhances surface toughness and resistance to external mechanical damage.
Fine particle size distribution — enables uniform dispersion in liquid resin systems with minimal impact on appearance.
Dosage: Typical addition levels range from 0.5% to 2.0%, depending on formulation requirements.
Compatibility: Suitable for solvent-based such as acrylic resins, nitrocellulose, polyurethane resins, and epoxy resins and UV-curable systems; pre-testing is recommended.
|
|
| الـ MOQ: | 5000 كجم |
| السعر: | قابل للتفاوض |
| طريقة الدفع: | الاعتماد المستندي، تي/تي |
| قدرة التوريد: | 500 طن / شهر |
WQ-P2105B is a high performance micronized polytetrafluoroethylene (PTFE) wax powder additive primarily used to improve the surface properties of coatings and functional finishes. Leveraging the inherently low surface energy and friction coefficient of PTFE, WQ-P2105B significantly enhances the slipperiness, wear resistance, scratch resistance, and anti-stick properties of coatings, making it suitable for applications requiring high surface quality and durability.
WQ-P2105B is similar to Lanco 1792 features a fine and uniform particle size distribution, allowing for easy dispersion within the system. It provides excellent functional performance to coatings without significantly affecting the film's appearance and gloss.
| Characteristics | Target value |
|---|---|
| Appearance | White Powder |
| Melting Point | 327℃ |
| Particle size | D50: ＜4.2µm D90: ＜8.0µm |
| Bulk Density | 0.60 g/ml |
| Whiteness | 93% |
| Specific surface area | 2.5 ㎡/g |
WQ-P2105B is typically used as a surface modifier and performance additive in:
…where improved slip, abrasion resistance, and surface durability are desired.
Extremely high and consistent slip properties — the low coefficient of friction imparted by PTFE helps coatings exhibit smooth feel and reduced surface resistance.
Excellent abrasion resistance — improves durability and resistance to wear and surface degradation during use.
High-temperature stability — retains performance under elevated temperatures typical in industrial coatings applications.
Good scratch resistance — enhances surface toughness and resistance to external mechanical damage.
Fine particle size distribution — enables uniform dispersion in liquid resin systems with minimal impact on appearance.
Dosage: Typical addition levels range from 0.5% to 2.0%, depending on formulation requirements.
Compatibility: Suitable for solvent-based such as acrylic resins, nitrocellulose, polyurethane resins, and epoxy resins and UV-curable systems; pre-testing is recommended.
